Encyclopedia @ Vestigatio Search
Web    Encyclopedia    News    Blogs    Forums   

Coulomb blockade


In physics, a Coulomb blockade, named after Charles-Augustin de Coulomb, is the increased resistance at small bias voltages of an electronic device comprising at least one low-capacitance tunnel junction.

A tunnel junction is, in its simplest form, a thin insulating barrier
between two conducting electrodes. If the electrodes are
superconducting, Cooper pairs with a
charge of two elementary charges carry the current. In the case
that the electrodes are normalconducting, i.e. neither
superconducting nor
semiconducting, electrons with a charge of one
elementary charge carry the current. The following reasoning is for
the case of tunnel junctions with an insulating barrier between two
normalconducting electrodes (NIN junctions).

According to the laws of classical electrodynamics, no current can
flow through an insulating barrier. According to the laws of
quantum mechanics, however, there is a nonvanishing (larger than zero)
probability for an electron on one side of the barrier to reach the
other side (see quantum tunnelling). When a bias voltage is applied, this means that there
will be a current flow. In first-order approximation, that is,
neglecting additional effects, the tunnelling current will be
proportional to the bias voltage. In electrical terms, the tunnel
junction behaves as a resistor with a constant resistance, also
known as an ohmic resistor. The resistance depends exponentially
on the barrier thickness. Typical barrier thicknesses are on the order
of one to several nanometers.

An arrangement of two conductors with an insulating layer in between not
only has a resistance, but also a finite capacitance. The insulator
is also called dielectric in this context, the tunnel junction
behaves as a capacitor.

Due to the discreteness of electrical charge, current flow through a tunnel junction is a series of events in which exactly one electron passes (tunnels) through the tunnel barrier (we neglect events in which two electrons tunnel simultaneously). The tunnel junction capacitor is charged with one elementary charge by the tunnelling electron, causing a voltage buildup U=e/C, where e is the elementary charge of 1.6×10-19 coulomb and C the capacitance of the junction. If the capacitance is very small, the voltage buildup can be large enough to prevent another electron from tunnelling. The electrical current is then suppressed at low bias voltages and the resistance of the device is no longer constant. The increase of the differential resistance around zero bias is called the Coulomb blockade.

In order for the Coulomb blockade to be observable, the temperature has to be low enough so that the characteristic charging energy (the energy that is required to charge the junction with one elementary charge) is larger than the thermal energy of the charge carriers. For capacitances above 1 femtofarad (10-15 farad), this implies that the temperature has to be below about 1 kelvin. This temperature range is routinely reached for example by dilution refrigerators.

To make a tunnel junction in plate condenser geometry with a capacitance of 1 femtofarad, using an oxide layer of electric permeability 10 and thickness one nanometer, one has to create electrodes with dimensions of approximately 100 by 100 nanometers. This range of dimensions is routinely reached for example by electron beam lithography and appropriate pattern transfer technologies, like the Niemeyer-Dolan technique, also known as shadow evaporation technique.

Another problem for the observation of the Coulomb blockade is
the relatively large capacitance of the leads that connect the tunnel
junction to the measurement electronics.

Single electron transistor


The simplest device in which the effect of Coulomb blockade can be
observed is the so-called single electron transistor. It consists
of two tunnel junctions sharing one common electrode with a low self-capacitance,
known as the island. The electrical potential of the island can be tuned by a third electrode (the gate),
capacitively coupled to the island.

In the blocking state no accessible energy levels are within tunneling range of the electron (red) on the source contact. All energy levels on the island electrode with lower energies are occupied.

When a positive voltage is applied to the gate electrode the energy levels of the island electrode are lowered. The electron (green 1.) can tunnel onto the island (2.), occupying a previously vacant energy level. From there it can tunnel onto the drain electrode (3.) where it inelastically scatters and reaches the drain electrode Fermi level (4.).

The energy levels of the island electrode are evenly spaced with a separation of \Delta E. \Delta E is the energy needed to each subsequent electron to the island, which acts as a self-capacitance C. The lower C the bigger \Delta E gets. It is crucial for \Delta E to be larger than the energy of thermal fluctuations k_BT, otherwise an electron from the source electrode can always be thermally excited onto an unoccupied level of the island electrode, and no blocking can be observed.

Coulomb Blockade Thermometer


A typical Coulomb Blockade Thermometer (CBT) is made from an array of metallic islands, connected to each other through a thin insulating layer. A tunnel junction forms between the islands, and as voltage is applied, electrons may tunnel across this junction. The tunneling rates and hence the conductance vary according to the charging energy of the islands as well as the thermal energy of the system.

Coulomb Blockade Thermometer is a primary thermometer based on electric conductance characteristics of tunnel junction arrays. The parameter V½=5.439NkBT/e, the full width at half
minimum of the measured differential conductance dip over an array of N junctions together with the physical constants provide the absolute temperature.

Literature


D.V. Averin and K.K Likharev Mesoscopic Phenomena in Solids, edited by B.L. Altshuler, P.A. Lee, and R.A. Webb (Elsevier, Amsterdam, 1991)

noncommercial


Introduction to Single-Electronics and the Coulomb Blockade

commercial


SIMON: Single-Electron simulator
SECS: Single Electron device and Circuit Simulator
Computational Single-Electronics book

   
   
This section is sponsored by:

Looking for Coulomb Blockade?
Find Coulomb Blockade and more at Ansearch. Answers that matter most!
www.ansearch.com


Lowest Priced Computers
Get the lowest prices on laptops, desktops and computer accessories
www.Geeks.com


Laptops - Save Money and Time
Complete Laptop at Cheap Price! Compare &Deal Here.
Laptop-s.cn


HP Laptops & Notebooks
Find great deals on HP laptops & notebooks along with accessories for your computer.
www.shopping.hp.com


Buy Computers Cheap
Get Computer,Laptop,Acces. Save and Order Now!
Portable-LaptopComputers.com


Complete Laptop &Accessories
Need laptop &accessories in new tech? Find here at affordable Price.
Computer-Laptop.net


Get a Mac Computer
Find the Mac computer that fits your needs from the Macbook to the iMac
store.apple.com


Laptop & Desktop Computers
Find great deals & low prices brand name laptops and desktop computers.
www.buy.com




©2008 Vestigatio